Desktop Station Air(DSair) is a command station based on Flash Air and Arduino UNO. DSair works standalone and wifi access point. You don't need to prepare wifi router and pc.
If you want cheaper one or DIY version, see DSshield with FlashAir. The DIY version basic schematic and software is same as DSair. DSshield with FlashAir is no support edition. At own your risk.
The following 3 videos are provided by Kangaroo John from Down Under.
We provide an original app based on web app. You don't need to install! Access to DSair with your internet browser. You can get app at once!
DSair is very compact command station supporting wifi access point.
|Rokuhan||e-Train Controller||-||R||Internal||200USD||No wifi, No BLE.|
|Digikeijs||DR5000||R||R||Internal||180US||Software Compatible with Z21|
|TCS||WifiThrottle||NR||Unknown||External||Unknown||Now developing(Mar 2018)|
NR: Not Required R: Required
|Slow Flashing||Wait for power on|
|2 Fast Flashing||No Flash Air|
|Turn on||Power on|
DSair can edit SSID and password.If you changed, please change to read the default settings.
DSair supports iOS 6 or later, Arduino 6 or later. Of course, the other device which has Wi-Fi and internet browser, you can control DSair easily.
|Firefox||Use latest version|
|Chrome||Use latest version|
|Opera||Use latest version|
The firmware includes Arduino sketch for ATMEGA328P-PU and SD_WLAN web app folder for FlashAir W-04.
If you can buy FlashAir W-04 at your nearby store, we are providing very easy setup tool for FlashAir.
|DSair Soldered, with FlashAir||130EUR|
|International shipping (e-Packet)||8EUR|
Order is available. Order page is here.