desktop_station_s_serial_communication_specification
差分
このページの2つのバージョン間の差分を表示します。
| 両方とも前のリビジョン前のリビジョン次のリビジョン | 前のリビジョン次のリビジョン両方とも次のリビジョン | ||
| desktop_station_s_serial_communication_specification [2017/02/05 13:48] – yaasan | desktop_station_s_serial_communication_specification [2017/06/05 06:33] – [Parameter meaning] yaasan | ||
|---|---|---|---|
| 行 25: | 行 25: | ||
| ^Commands ^ Parameters ^ examples ^ | ^Commands ^ Parameters ^ examples ^ | ||
| + | |setPing| none | setPing()\n| | ||
| |setPower| Power on/off | setPower(1)\n| | |setPower| Power on/off | setPower(1)\n| | ||
| |setLocoSpeed| Locomotive address, Speed, (Speed Step)| setLocoSpeed(5, | |setLocoSpeed| Locomotive address, Speed, (Speed Step)| setLocoSpeed(5, | ||
| 行 51: | 行 52: | ||
| |CV Value | 0-255 | Locomotive' | |CV Value | 0-255 | Locomotive' | ||
| + | 以下のテーブルは、ロコとポイントのアドレス(1-65535)の意味をあらわしてます。\\ | ||
| The following table describes Locomotive' | The following table describes Locomotive' | ||
| 行 77: | 行 79: | ||
| - Wait for receiving a message "100 Ready" | - Wait for receiving a message "100 Ready" | ||
| - After received "100 ready", | - After received "100 ready", | ||
| + | - Firstly you need to send " | ||
| + | - The output of track is available. Send commands which you want. | ||
| ===== Example of communication log ===== | ===== Example of communication log ===== | ||
| + | |||
| + | 以下は、通信ログの例です。setPing()を投げて生存確認をしてから、setPower(1)で線路電源のON、そのあとはコマンドを打てばその通りにDCC信号が出力されます。 | ||
| < | < | ||
desktop_station_s_serial_communication_specification.txt · 最終更新: 2023/12/26 21:00 by yaasan