dsshield2_en
差分
このページの2つのバージョン間の差分を表示します。
両方とも前のリビジョン前のリビジョン | |||
dsshield2_en [2021/05/23 07:42] – [sketch] yaasan | dsshield2_en [2023/03/01 06:50] (現在) – [Distribution] yaasan | ||
---|---|---|---|
行 105: | 行 105: | ||
Please prepare Arduino UNO, AC adapter (12V), feeder wire, etc. by yourself. | Please prepare Arduino UNO, AC adapter (12V), feeder wire, etc. by yourself. | ||
- | Notice: \fnDroid Sans Fallback | + | Notice:\\ |
The RUN LED in the initial lot of R0 (manufactured in February 2021) is a non-bright type and glows weakly. If you are concerned, changing the R1 resistor (1608 size) from 1.2kΩ to a slightly smaller resistance value (680Ω to 1kΩ) will improve the glowing. | The RUN LED in the initial lot of R0 (manufactured in February 2021) is a non-bright type and glows weakly. If you are concerned, changing the R1 resistor (1608 size) from 1.2kΩ to a slightly smaller resistance value (680Ω to 1kΩ) will improve the glowing. | ||
dsshield2_en.1621723349.txt.gz · 最終更新: 2021/05/23 07:42 by yaasan