ユーザ用ツール

サイト用ツール


dsshield2_en

差分

このページの2つのバージョン間の差分を表示します。

この比較画面へのリンク

両方とも前のリビジョン前のリビジョン
dsshield2_en [2021/05/23 07:42]
– [sketch] yaasan
dsshield2_en [2023/03/01 06:50] (現在)
– [Distribution] yaasan
行 105: 行 105:
 Please prepare Arduino UNO, AC adapter (12V), feeder wire, etc. by yourself. Please prepare Arduino UNO, AC adapter (12V), feeder wire, etc. by yourself.
  
-Notice: \fnDroid Sans Fallback +Notice:\\  
 The RUN LED in the initial lot of R0 (manufactured in February 2021) is a non-bright type and glows weakly. If you are concerned, changing the R1 resistor (1608 size) from 1.2kΩ to a slightly smaller resistance value (680Ω to 1kΩ) will improve the glowing. The RUN LED in the initial lot of R0 (manufactured in February 2021) is a non-bright type and glows weakly. If you are concerned, changing the R1 resistor (1608 size) from 1.2kΩ to a slightly smaller resistance value (680Ω to 1kΩ) will improve the glowing.
  
dsshield2_en.txt · 最終更新: 2023/03/01 06:50 by yaasan

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki