dsshield2_en

差分

このページの2つのバージョン間の差分を表示します。

この比較画面へのリンク

--- dsshield2_en [2021/04/08 07:46] – [Schematic] yaasan
+++ dsshield2_en [2023/03/01 06:50] (現在) – [Distribution] yaasan
@@ 行 58: / 行 58: @@
 ^Revisions ^Downloads ^Updates ^
+|rev.004| [[https://desktopstation.net/bin/DSshield_004.zip|DOWNLOAD]] | Support analog PWM output. |
 |rev.002| [[https://desktopstation.net/bin/DSshield_002.zip|DOWNLOAD]] | fix MM2 address bug, fix bug in voltage protection function |
 |rev.001| [[https://desktopstation.net/bin/DSshield_001.zip|DOWNLOAD]] | Support for UNO Wifi rev.2 (ATMEGA4809)
@@ 行 83: / 行 84: @@
 In Arduino IDE 1.8.13, the screen looks like the following: The notation differs depending on the version of Arduino IDE, so please be flexible.
-{{::dshield2_ide1.png?200|}}
+{{::dsshield2_ide1.png?200|}}
 Please select "Arduino UNO" or "Geuino UNO" for the hardware, Geuino was the name of Arduino when its management was divided. If you want to use other microcontrollers, you will need to modify the sketch significantly.
-{{::dshield2_ide2.png?200|}}
+{{::dsshield2_ide2.png?200|}}
 If you are using Arduino UNO wifi rev.2 (ATMEGA4809), please configure as follows
@@ 行 104: / 行 105: @@
 Please prepare Arduino UNO, AC adapter (12V), feeder wire, etc. by yourself.
-Notice: \fnDroid Sans Fallback
+Notice:\\
 The RUN LED in the initial lot of R0 (manufactured in February 2021) is a non-bright type and glows weakly. If you are concerned, changing the R1 resistor (1608 size) from 1.2kΩ to a slightly smaller resistance value (680Ω to 1kΩ) will improve the glowing.

dsshield2_en.txt · 最終更新: 2023/03/01 06:50 by yaasan