dsshield2_en
差分
このページの2つのバージョン間の差分を表示します。
| 両方とも前のリビジョン前のリビジョン次のリビジョン | 前のリビジョン | ||
| dsshield2_en [2021/04/08 07:47] – [How to write] yaasan | dsshield2_en [2023/03/01 06:50] (現在) – [Distribution] yaasan | ||
|---|---|---|---|
| 行 58: | 行 58: | ||
| ^Revisions ^Downloads ^Updates ^ | ^Revisions ^Downloads ^Updates ^ | ||
| + | |rev.004| [[https:// | ||
| |rev.002| [[https:// | |rev.002| [[https:// | ||
| |rev.001| [[https:// | |rev.001| [[https:// | ||
| 行 104: | 行 105: | ||
| Please prepare Arduino UNO, AC adapter (12V), feeder wire, etc. by yourself. | Please prepare Arduino UNO, AC adapter (12V), feeder wire, etc. by yourself. | ||
| - | Notice: \fnDroid Sans Fallback | + | Notice:\\ |
| The RUN LED in the initial lot of R0 (manufactured in February 2021) is a non-bright type and glows weakly. If you are concerned, changing the R1 resistor (1608 size) from 1.2kΩ to a slightly smaller resistance value (680Ω to 1kΩ) will improve the glowing. | The RUN LED in the initial lot of R0 (manufactured in February 2021) is a non-bright type and glows weakly. If you are concerned, changing the R1 resistor (1608 size) from 1.2kΩ to a slightly smaller resistance value (680Ω to 1kΩ) will improve the glowing. | ||
dsshield2_en.1617835674.txt.gz · 最終更新: 2021/04/08 07:47 by yaasan